The airport range

Our machines are designed to tackle a number of applications and are split into two groups A9500 (high speed runway sweeping) and A7000 - A12000 (multi-task sweeper washer).

High speed runway sweeping - A9500

The highly specialised high speed runway sweeping machine utilises special V-formation channels directing debris under the primary suction nozzles for the collection of larger FOD (foreign object debris). These primary suction nozzles are followed by a set of full width suction nozzles and a widesweep brush that pick up the finer debris. This innovative sweeping system allows sweeping speeds of up to 40 km/h.

Multi-task sweeper washer

One of the primary functions of the multi-task sweeper washer is the cleaning of oil and grease from aircraft parking stands which, when wet can become dangerous and slippery. Our multi-task sweeper washer quickly cleans and de-greases the surface making it ready for immediate use.

Typical modular option:

8 or 12m3 hopper in normal or stainless steel

170 or 205kW power pack

Spray bar in front of full width suction with rotating jets

Detergent dispersal system

Full width mid mounted suction nozzles with full width brush behind

Runway rubber removal (chemical)

Removing rubber deposits from the runway touch down zone (TDZ) is critical to meet runway friction requirements. This method of rubber removal avoids damaging the runway surface and collects the rubber residue for safe disposal.

Common tasks of Multi-task sweeper

Apron sweeping

Runway sweeping up to 20 km/h

Liquid pick-up with full width brush behind

Hopper modular options

With a choice of materials and capacities, the hopper is the starting point for the sweeper specification. Each hopper is made of 3 primary parts - the engine cowl, the hopper body and the integral water tanks. Other features include a rear screen shaker, inspection hatch ladder, beacons, single colour paint finish on the exterior of the hopper, dirt inlet to the hopper via replaceable rubber coated wear plates, marker lights and boards and the safety prop.

Water tank modular options

The multi-task machines have 2 linked water tanks located either side of the hopper for optimum weight distribution and balance. An additional water tank inside the hopper can be either 600 or 1000 litres and an external water tank can also be installed between the cab and the hopper. Tanks can be produced from normal steel(internally painted with a special marine coating) or stainless steel.

Power pack modular options

The power pack uses a choice of Mercedes auxiliary engines with power ratings up to 205kW. Power is transmitted to the dynamically balanced fan via a belt drive system and fluid flywheel. The multi-task machines are designed to deliver exceptional performance at very low engine rpm keeping noise and fuel consumption to a minimum.

Hydrostatic transmission - for ultimate speed control from 0 km/h, we offer a hydrostatic transmission driven from the chassis engine. This transmission can also be used to power the entire sweeper washer function from the chassis engine.

High pressure water system modules

A wide range of high pressure systems is available up to 300bar @ 100 l/min. Water may be applied to the surface through a selection of spray bars via either V jets or, for deep cleansing, rotary jets.

Wanderhoses

There are nine different wanderhose options mounted either at the rear or on top of the vehicle - ideal for clearing out gulleys at the edge of the runways or taxiways or for tough to reach areas.

Specifications of Beam A7000
Voided air volume:	7m3	Typical chassis layout:	4x2
Typical chassis GVW:	18 tonne	Water volume standard:	1880 litres

Specifications of Beam A8000
Voided air volume:	8m3	Typical chassis layout:	4x2
Typical chassis GVW:	18 tonne	Water volume standard:	2160 litres

Specifications of Beam A9000
Voided air volume:	9m3	Typical chassis layout:	4x2
Typical chassis GVW:	18 tonne	Water volume standard:	2420 litres

Specifications of Beam A12000
Voided air volume:	12m3	Typical chassis layout:	6x2*4
Typical chassis GVW:	26 tonne	Water volume standard:	3230 litres